A popular option for bars, restaurants, bingo halls and casinos that have t-bar type drop ceilings is the fully concealed Smokeeter LS system. the Smokeeter LS requires a good three feet of clearance between the t-bar and the true ceiling. I would say that "you may have seen the Smokeeter LS in action," but as they are completely conceled, you wouldn’t see them at all. Applebee’s all over the country use two Smokeeter LS smoke removal systems in each restaurant, so though you may not have seen them, most people have been in an Applebee’s and probably never noticed that these unit were running.
I personally reccommend the Smokeeter LS system whenever it will fit an application, and for several good reasons, it is the quietest solution, it combines washable electronic filter cells and a significant ammount of granulated carbon (with optional carbon plenum shown to the left) and it offers powerfull and cost effective solutions without ever being seen and barely ever heard.
With washable electronic filter cells, there are no expensive HEPA filters to continually purchase, which save thousands of dollars in replacement filter costs. The only thing that needs replacing is the 6 odor absorbing carbon trays (about $45 each) every 6-12 months. The Smokeeter LS provides 1500 CFM of airflow, which is enough to provide over ten air changes per hour in a 1,100 square foot area. Because they are completely conceled, these smoke eaters can be run on high speed without causing excessive noise.
The included wired remote switch, hooks up like a thermostat and allows the unit to be controlled and switched on and off, without having to climb a ladder. The remote includes a large red indicator light so that you can see when the smoke eater is running.
There are several Smokeeter LS packages available, which are shipped with attractive 2′X2′ ceiling tile return and supply grills. Insallation is fairly simple, just hang the unit above the drop from anchored cables, replace a few standard ceiling tiles with the return and supply grills and connect flex duct between the flanged grills and the Y conncetors that are included with the packaged systems.
If you have any questions, click the "comments" button and post them here, I’ll be notified by email and will be happy to go into more detail.
Hello, My name is Bill. We just bought a bar and it is known for being smoky. It has a drop ceiling and there’s nothing we can do to change that. So basically the ceiling height is about 8ft. The room we have is about 1400 sq feet. I am interested in your expertise on which smokeater i should use. I would consider the bar being under the category of moderate to heavy smoke. Thanks much. Bill
Hello, my name is Rod and I want to welcome you to the “ask the experts” section of the Smoke Eater Blog. In this section myself and other experts in the air cleaner industry will be available to answer questions. The advice that you will find in this forum is a collective effort which draws information from many of the top professionals in the industry, from the top smoke eater manufacturers, distributors, engineers and consultants.
So post your question by clicking the comments link. One of us will review your question and turn it into a blog post or add your comment to an existing blog on the same topic in the "Ask the Experts" section.
CLICK HERE for the largest selection of smoke eaters on the internet!
Lowest Prices
Largest Selection
Advice from Industry Experts
Every Available Technology
Guaranteed Performance
FREE U.S. Shipping
If you’re the owner or proprietor of a bar or restaurant, then you are probably familiar with the age-old nonsmoker vs. smoker controversy… You have both smoking and nonsmoking sections in your bar/restaurant, and your nonsmokers are complaining about the horrible smell emanating from across the dining area… sound familiar?
There are a few ways to handle this problem:
1. You ignore it and potentially lose patrons 2. You issue a non-smoking policy, potentially losing patrons 3. You exhaust the smoke, along with much needed heating and air conditioning 4. You install air cleaning equipment, keeping everyone content, and maintaining a level of consistent patronage.
Choosing the proper air cleaner for your particular situation can often be a difficult task. As there are so many products available that are designed to do essentially the same job, it can be frustrating trying to determine which of the smoke eaters you saw today will offer the best performance for your investment.
There are different methods for effectively cleaning up the air in your bar or restaurant, and the method that will work best for your establishment will be determined by various factors. These factors include:
1. The size of the area 2. The number of smokers 3. The amount of pollutants being generated 4. The length of time the contaminants are present
The key element to effectively removing the contamination from your environment is air exchanges. The better your air exchange rate and airflow pattern, the more satisfied your customers and employees will be. One of the above mentioned variables being the amount of pollutants being generated, you’ll want to determine what it’s going to take to rid your air of the harmful pollutants.
I’ve provided a quick reference chart to give you an idea of what kind of air exchange you’ll want to achieve for popular scenarios in a bar/restaurant setting. My calculations are a tad aggressive, since people’s expectation levels are different, and you always want to be able to turn your air cleaner up to a higher fan setting in extreme circumstances… the bottom line is, you don’t want your air cleaner to be working overtime and only acheiving the bare minimum, because what happens when the contamination levels increase? You end up with a negative opinion of the performance of the air cleaner, and more importantly, your clientele may suffer because of it.
Mild to moderate amounts of smoke (just noticeable) - 6-8 air changes per hour Moderate to moderately heavy (more noticeable) - 8-10 air changes per hour Heavy (still breatheable, but annoying) - 10-14 air changes per hour London Fog (so heavy you could cut it with a knife) - 15+ air changes per hour* (recommended for designated smoking areas, like cigar lounges and the like.) *consult a professional in a case like this
All too frequently, people make the mistake of undersizing their application, based on incorrect room size calculations, misinformation about the air cleaner, or, most commonly, equipment cost. It is no secret that the proper selection of smoke eater or smoke eaters can get costly; however, in the air quality industry, you certainly get what you pay for. All too often, people will base their decision on cost rather than effect, and that is almost always a recipe for disappointment. For example, if you were invited to compete in a drag race, and had to purchase a vehicle, would you buy a go-kart just because it was cheaper? Of course not! The point is, you need the right tools for the job in order to acheive your goal.
Now, I know that there are also circumstances that are simply cost-prohibitive… the equipment you need to do the job properly is significantly more than the budget you’ve set aside for the project… this is a rather common occurrence, due to lack of knowledge of the industry, or the perceived value of the equipment. As with many types of purchases, there are usually options that are available to aid in budgeting the overall cost, such as leasing options, payment plans, etc… Not all companies have these commodities available to their clients, but some do… It’s definitely worth checking out if you need a solution to your problem.
I hope the above information has been helpful, and feel free to comment on anything I may have failed to mention. If you have questions or need assistance, give us a call toll free:
The Trion Mini Mist Collector is a compact dual pass electrostatic precipitator designed to filter out industrial air pullotants generated by the machining process. This mini mist eliminator is produced by Trion Inc - a company that was established in 1947 to manufacture residential, commercial and industrial air pollution control equipment.
This compact system is rated at approximately 750 CFM and is the best value compared to centrifugal and media based mist collection products in the marketplace today.
Technical Specifications and Features For The Trion Machine Mount Mist Collector
A popular option for bars, restaurants, bingo halls and casinos that have t-bar type drop ceilings is the fully concealed Smokeeter LS system. the Smokeeter LS requires a good three feet of clearance between the t-bar and the true ceiling. I would say that "you may have seen the Smokeeter LS in action," but as they are completely conceled, you wouldn’t see them at all. Applebee’s all over the country use two Smokeeter LS smoke removal systems in each restaurant, so though you may not have seen them, most people have been in an Applebee’s and probably never noticed that these unit were running.
I personally reccommend the Smokeeter LS system whenever it will fit an application, and for several good reasons, it is the quietest solution, it combines washable electronic filter cells and a significant ammount of granulated carbon (with optional carbon plenum shown to the left) and it offers powerfull and cost effective solutions without ever being seen and barely ever heard.
With washable electronic filter cells, there are no expensive HEPA filters to continually purchase, which save thousands of dollars in replacement filter costs. The only thing that needs replacing is the 6 odor absorbing carbon trays (about $45 each) every 6-12 months. The Smokeeter LS provides 1500 CFM of airflow, which is enough to provide over ten air changes per hour in a 1,100 square foot area. Because they are completely conceled, these smoke eaters can be run on high speed without causing excessive noise.
The included wired remote switch, hooks up like a thermostat and allows the unit to be controlled and switched on and off, without having to climb a ladder. The remote includes a large red indicator light so that you can see when the smoke eater is running.
There are several Smokeeter LS packages available, which are shipped with attractive 2′X2′ ceiling tile return and supply grills. Insallation is fairly simple, just hang the unit above the drop from anchored cables, replace a few standard ceiling tiles with the return and supply grills and connect flex duct between the flanged grills and the Y conncetors that are included with the packaged systems.
The